• New
Harman/Kardon

Harman Kardon Citation Oasis DAB

Details
Variations

Voice-controlled speaker with DAB/DAB+ radio and wireless phone charging

RM 1,299.00 1299.0 each


For Bulk Enquiry: Click Here

Beautiful Sound That Speaks to you

Beautiful and understated by design, the Harman Kardon Citation Oasis brings rich Harman Kardon sound to any room. Custom alarms and night Wi-Fi switch are perfect for the bedroom, while wireless phone charging and DAB/DAB+ radio make it ideal for use in the kitchen, too. Pair with other Citation speakers to create a complete home audio experience and get access to over 300 music streaming services through Chromecast built-in™ and AirPlay. Plus, talk to Google for hands-free help, it’s the perfect addition to every modern home.

Item# HKCITAOASISGRYAS

General Specifications

Transducer 2 x 1.75" (2 x 44mm)
Output power 2 x 6W RMS
Signal-to-noise ratio 80dBrA
Power Supply 100-240V – 50/60Hz

Audio Specifications

2.4G Wi-Fi transmitter frequency range 2412 – 2472MHz (2.4GHzISM Band, USA 11 Channels, Europe and others 13 Channels)
2.4G Wi-Fi transmitter power <20dBm
2.4G Wi-Fi modulation DBPSK, DQPSK, CCK, QPSK, BPSK, 16QAM, 64QAM
5G Wi-Fi transmitter power <23dBm
5G Wi-Fi modulation QPSK, BPSK, 16QAM, 64QAM, 256QAM
5G Wi-Fi transmitter frequency range 5.15 - 5.35GHz, 5.470 - 5.725GHz, 5.725 - 5.825GHz
Supported audio formats HE-AAC, LC-AAC, MP3, Vorbis, WAV (LPCM), FLAC, Opus

Dimensions

Dimensions (W x H x D) 218 x 66 x 148 mm (8.6" x 2.6" x 5.8")
Weight 1.2kg (2.6lb)

Control and Connection Specifications

Bluetooth® version 4.2
Bluetooth transmitter frequency range 2402 – 2480MHz
Bluetooth transmitter power <10dBm
Bluetooth transmitter modulation GFSK,π/4 DQPSK, 8DPSK
Wireless network 802.11 a/b/g/n/ac (2.4GHz/5GHz)

Notification

Google, Android, Google Home and Chromecast built-in are trademarks of Google LLC. -
Note WARNING!! This product contains a button/coin cell battery and is hazardous. Keep batteries away from children. Batteries can cause severe or fatal injuries in 2 hours or less if swallowed or placed inside any part of the body. Medical attention should be sought immediately if it is suspected the battery has been swallowed or placed inside any part of the body.
Click here for a complete list of all specs for this product

Spec Sheet (English)

English 683 KB
  • 1 x Citation Oasis
  • 1 x power cable (1.8m)
  • 1 x Quick-start guide
  • 1 x Warranty sheet
  • 1 x Safety sheet
product box
{"totalSize":9,"done":true,"searchRecords":[{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XjIlAAK"},"Title":"HK Citation: What you need to get started","Id":"ka25d000000XjIlAAK","ArticleNumber":"000017313","Question__c":"Before you start installing your new device","Process__c":"

Getting started with the checklist

\n\n
  • A Harman Kardon Citation device(s).\"ONE\"
  • Latest version of the Google Home app installed on your mobile device.\"GH 
  • Latest version of the Google app \"\" (Android only) installed on your mobile device
  • A Google Account (you can create one online via Google).
  • A mobile device with either iOS or Android support.\n\t
    • ​Must have iOS 10 or higher
    • Must have Android 5.0 and higher
    • There is no support for PC set up.
    \n\t
  • Your mobile device must support 5 GHz Wireless Network connection in order to set up our Harman Kardon Citation device. Note: Wireless Network with WPA2-Enterprise encryption is not supported.
  • An internet connection from your local ISP (Internet Service Provider).
  • Your Wireless Network must secured with WPA2 Encryption (Enterprise mode NOT supported). 
  • Availability and performance of certain features, services and applications are device- and network-dependent and may not be available in all areas; subscription(s) may be required, and additional terms, conditions and/or charges may apply.
\nOnce you have all requirement and what is needed then follow the video below that shows you how to install your device.

 ","Answer__c":"

Getting started with the checklist

\n\n
  • A Harman Kardon Citation device(s).\"ONE\"
  • Latest version of the Google Home app installed on your mobile device.\"GH 
  • Latest version of the Google app \"\" (Android only) installed on your mobile device
  • A Google Account (you can create one online via Google).
  • A mobile device with either iOS or Android support.\n\t
    • ​Must have iOS 10 or higher
    • Must have Android 5.0 and higher
    • There is no support for PC set up.
    \n\t
  • Your mobile device must support 5 GHz Wireless Network connection in order to set up our Harman Kardon Citation device. Note: Wireless Network with WPA2-Enterprise encryption is not supported.
  • An internet connection from your local ISP (Internet Service Provider).
  • Your Wireless Network must secured with WPA2 Encryption (Enterprise mode NOT supported). 
  • Availability and performance of certain features, services and applications are device- and network-dependent and may not be available in all areas; subscription(s) may be required, and additional terms, conditions and/or charges may apply.
\nOnce you have all requirement and what is needed then follow the video below that shows you how to install your device.

 ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XjAhAAK"},"Title":"HK Citation: Bluetooth pairing","Id":"ka25d000000XjAhAAK","ArticleNumber":"000025622","Question__c":"How to connect your Bluetooth smartphone or tablet","Process__c":"

Citation One and Citation 100

\n\n
  1. Press the Bluetooth \"BT icon. Located on the top panel. \"On
  2. Go to \"Settings-menu\"NEXT\"Make sure Bluetooth is  \"ON
  3. Find your Citation speaker and connect.
\n          \"Connect\"\n\n
  1. You are now connected and ready to play music over Bluetooth, Enjoy!
\n\n

Citation 300, 500, Bar and Towers

\n\n
  1. Swipe up\"FINGER\" on the display to find Bluetooth icon.
  2. Tap \"Citation\"NEXT\"Icon will light up \"BT\"NEXT\"Go to \"Settings-menu \"NEXT\"Make sure Bluetooth is \"ON
  3. Find your Citation speaker.
\n          \"BT\n\n
  1. You are now connected and ready to play music over Bluetooth, Enjoy!
","Answer__c":"

Citation One and Citation 100

\n\n
  1. Press the Bluetooth \"BT icon. Located on the top panel. \"On
  2. Go to \"Settings-menu\"NEXT\"Make sure Bluetooth is  \"ON
  3. Find your Citation speaker and connect.
\n          \"Connect\"\n\n
  1. You are now connected and ready to play music over Bluetooth, Enjoy!
\n\n

Citation 300, 500, Bar and Towers

\n\n
  1. Swipe up\"FINGER\" on the display to find Bluetooth icon.
  2. Tap \"Citation\"NEXT\"Icon will light up \"BT\"NEXT\"Go to \"Settings-menu \"NEXT\"Make sure Bluetooth is \"ON
  3. Find your Citation speaker.
\n          \"BT\n\n
  1. You are now connected and ready to play music over Bluetooth, Enjoy!
","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XjVOAA0"},"Title":"HK Citation: How to create a Stereo pair","Id":"ka25d000000XjVOAA0","ArticleNumber":"000018634","Question__c":"How to create a Stereo pair","Process__c":"If you have two of the same model Google Assistant speakers, you can create a stereo speaker system.\n

How to create a stereo pair...

\n\n
  1. Open the Google Home app\"User-added
  2. Find the speaker you want to setup in stereo pair
  3. Find the speaker/room \"User-added
  4. Tap on Settings \"User-added
  5. Go to Sound Settings
  6. Find the Speaker pair
  7. You are now entering the setup page \"pair\" Tap \"User-added
  8. Find your speaker under the Pair with list and tap.
  9. Move the speaker to be Left or Right side and press \"User-added\n\t
    1. You can tap on Play sound to identify which speaker it is.
    \n\t
  10. Find a name for your Stereo pair \"User-added
  11. It takes a minute to complete the setup.
  12. When the configuration is done it will say Ready \"READY\"
  13. Press Done
\nYou have now completed the setup and created a Stereo pair sound experience.

NOTE 1:  This is only possible with two of the same speakers.  If they are not identical (Example: Citation 100 & Citation One), setting up a stereo pair will not be an option.

NOTE 2:  It is possible to make a stereo pair of a Mk1 with a Mk2. Setup as normal.
\nAirplay from the Mk2 will not be available.

NOTE 3: It is only possible to use Chromecast and Bluetooth in stereo, Airplay will be mono (and should be grouped in iOS Airplay menu.


 \n
    ","Answer__c":"If you have two of the same model Google Assistant speakers, you can create a stereo speaker system.\n

    How to create a stereo pair...

    \n\n
    1. Open the Google Home app\"User-added
    2. Find the speaker you want to setup in stereo pair
    3. Find the speaker/room \"User-added
    4. Tap on Settings \"User-added
    5. Go to Sound Settings
    6. Find the Speaker pair
    7. You are now entering the setup page \"pair\" Tap \"User-added
    8. Find your speaker under the Pair with list and tap.
    9. Move the speaker to be Left or Right side and press \"User-added\n\t
      1. You can tap on Play sound to identify which speaker it is.
      \n\t
    10. Find a name for your Stereo pair \"User-added
    11. It takes a minute to complete the setup.
    12. When the configuration is done it will say Ready \"READY\"
    13. Press Done
    \nYou have now completed the setup and created a Stereo pair sound experience.

    NOTE 1:  This is only possible with two of the same speakers.  If they are not identical (Example: Citation 100 & Citation One), setting up a stereo pair will not be an option.

    NOTE 2:  It is possible to make a stereo pair of a Mk1 with a Mk2. Setup as normal.
    \nAirplay from the Mk2 will not be available.

    NOTE 3: It is only possible to use Chromecast and Bluetooth in stereo, Airplay will be mono (and should be grouped in iOS Airplay menu.


     \n
      ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XjJaAAK"},"Title":"HK Citation: Cleaning FAQ","Id":"ka25d000000XjJaAAK","ArticleNumber":"000016804","Question__c":"How to properly clean the fabric around the speakers","Process__c":"Daily Care instructions for Citation speakers fabric (wool)\nDaily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years.\nNever use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself!\n\nMany types of stain can be removed using warm water with a microfiber cloth (not too wet).\nStain removal guide\nIf you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains.\nHere is how to do it.\n\nFirst, soak up the liquid with an absorbent napkin or Microfiber cloth.\nFor dried stains use a spoon to roughen the surface.\nTo avoid the stain spreading further start from the edge of the stain working towards the middle.\nWARNING!\nBe careful when using solvents, because these could dissolve the upholstery material beneath.\nRegular and normal cleaning\nVacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth.\nWhen using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric).\n \n\n\nGeneral information\nThese tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device.\nIn all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker.\nHARMAN do not have any recommended companies or partners to redirect any customers too.\n\nFor furter information we advise visiting the fabric company called KVADRAT by clicking on these links below:\nhttps://kvadrat.dk/care-and-maintenance/upholsteries\nhttps://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf \n\nThere are a lot of information about the fabric we are using and you can contact them for further information.","Answer__c":"Daily Care instructions for Citation speakers fabric (wool)\nDaily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years.\nNever use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself!\n\nMany types of stain can be removed using warm water with a microfiber cloth (not too wet).\nStain removal guide\nIf you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains.\nHere is how to do it.\n\nFirst, soak up the liquid with an absorbent napkin or Microfiber cloth.\nFor dried stains use a spoon to roughen the surface.\nTo avoid the stain spreading further start from the edge of the stain working towards the middle.\nWARNING!\nBe careful when using solvents, because these could dissolve the upholstery material beneath.\nRegular and normal cleaning\nVacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth.\nWhen using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric).\n \n\n\nGeneral information\nThese tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device.\nIn all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker.\nHARMAN do not have any recommended companies or partners to redirect any customers too.\n\nFor furter information we advise visiting the fabric company called KVADRAT by clicking on these links below:\nhttps://kvadrat.dk/care-and-maintenance/upholsteries\nhttps://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf \n\nThere are a lot of information about the fabric we are using and you can contact them for further information.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XjVPAA0"},"Title":"HK Citation: Wi-Fi network not found during setup","Id":"ka25d000000XjVPAA0","ArticleNumber":"000018629","Question__c":"Learn how to troubleshoot when you can’t connect your Google Assistant device to your home Wi-Fi network.","Process__c":"

      The Checklist

      \n\n

      Let us walk-through a list of things needed to ensure every requirement is met.

      \n\n
      1. Check your mobile device if that is able to connect to same Wireless network.
      2. Make sure you are within range of your Wireless router.
      3. Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
      4. Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.\n\t
        1. You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
        2. You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
        \n\t
      5. Try using a different mobile device, if you have one.
      6. Reboot your Wireless network router and your mobile device.
      \nWatch the video below for help with setting up your Google Assistant device.\n\n

      \n\n

      Wireless Network Extender

      \n\n

      Some houses or apartments can be too big for one Wireless network router to cover it all.
      Let's talk about the issues that might appear with an Extender network.

      \n\n
      1. Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
      2. Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
      3. Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
      4. To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
      5. In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
      \n\n

      One Wireless Network Name (SSID)

      \n\n
      1. You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
      2. If the Wireless speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
      3. To solve this issue, using two different name for your extended network will help with the performance of the Wireless connected speaker and Google Assistant request.
      \n\n

       

      ","Answer__c":"

      The Checklist

      \n\n

      Let us walk-through a list of things needed to ensure every requirement is met.

      \n\n
      1. Check your mobile device if that is able to connect to same Wireless network.
      2. Make sure you are within range of your Wireless router.
      3. Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
      4. Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.\n\t
        1. You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
        2. You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
        \n\t
      5. Try using a different mobile device, if you have one.
      6. Reboot your Wireless network router and your mobile device.
      \nWatch the video below for help with setting up your Google Assistant device.\n\n

      \n\n

      Wireless Network Extender

      \n\n

      Some houses or apartments can be too big for one Wireless network router to cover it all.
      Let's talk about the issues that might appear with an Extender network.

      \n\n
      1. Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
      2. Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
      3. Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
      4. To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
      5. In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
      \n\n

      One Wireless Network Name (SSID)

      \n\n
      1. You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
      2. If the Wireless speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
      3. To solve this issue, using two different name for your extended network will help with the performance of the Wireless connected speaker and Google Assistant request.
      \n\n

       

      ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xqw5AAC"},"Title":"JBL LINK: Wi-Fi network not found during setup","Id":"ka25d000000Xqw5AAC","ArticleNumber":"000020171","Question__c":"Learn how to troubleshoot when you can’t connect your Google Assistant device to your home Wi-Fi network.","Process__c":"

      The Checklist

      \n\n

      Let us walk-through a list of things needed to ensure every requirement is met.

      \n\n
      1. Check your mobile device if that is able to connect to same Wireless network.
      2. Make sure you are within range of your Wireless router.
      3. Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
      4. Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.\n\t
        1. You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
        2. You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
        \n\t
      5. Try using a different mobile device, if you have one.
      6. Reboot your Wireless network router and your mobile device.
      \nWatch the video below for help with setting up your Google Assistant device.\n\n

      \n\n

      Wireless Network Extender

      \n\n

      Some houses or apartments can be too big for one Wireless network router to cover it all.
      Let's talk about the issues that might appear with an Extender network.

      \n\n
      1. Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
      2. Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
      3. Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
      4. To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
      5. In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
      \n\n

      One Wireless Network Name (SSID)

      \n\n
      1. You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
      2. If the JBL LINK device is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
      3. To solve this issue, using two different name for your extended network will help with the performance of the JBL LINK Speaker and Google Assistant request.
      \n\n







       

      ","Answer__c":"

      The Checklist

      \n\n

      Let us walk-through a list of things needed to ensure every requirement is met.

      \n\n
      1. Check your mobile device if that is able to connect to same Wireless network.
      2. Make sure you are within range of your Wireless router.
      3. Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
      4. Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.\n\t
        1. You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
        2. You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
        \n\t
      5. Try using a different mobile device, if you have one.
      6. Reboot your Wireless network router and your mobile device.
      \nWatch the video below for help with setting up your Google Assistant device.\n\n

      \n\n

      Wireless Network Extender

      \n\n

      Some houses or apartments can be too big for one Wireless network router to cover it all.
      Let's talk about the issues that might appear with an Extender network.

      \n\n
      1. Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
      2. Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
      3. Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
      4. To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
      5. In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
      \n\n

      One Wireless Network Name (SSID)

      \n\n
      1. You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
      2. If the JBL LINK device is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
      3. To solve this issue, using two different name for your extended network will help with the performance of the JBL LINK Speaker and Google Assistant request.
      \n\n







       

      ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XjIjAAK"},"Title":"HK CITATION: Not showing up in Google Home app","Id":"ka25d000000XjIjAAK","ArticleNumber":"000017334","Question__c":"Not visible in the Google Home app during install","Process__c":"

      What you need first

      \n\n

      Make sure that the device is installed on your Wireless network, by ensuring these steps below:

      \n\n
      1. You have the most recent version of the Google Home app installed 
      2. Your Citation device is powered on
      3. Your Citation device is plugged into a wall outlet.
      4. The Citation device is located near your router 
      5. The white LED lights in front of the Citation device are blinking 
      6. If you are using an Apple iOS device, you need to turn on Bluetooth to installed the device.\n\t
        1. \n\t\t

          On your iOS device Home screen, tap Settings > Bluetooth 

          \n\t\t
        2. Make sure Bluetooth is on
        3. Return back to the Google Home app 
        4. Your Citation device should appear as "Set up this device"
        \n\t
      7. If you are using an Android device, you need to turn on Bluetooth and Location Services.\n\t
        1. On your Android device, tap Settings.
        2. Find Bluetooth settings > Make sure Bluetooth is on
        3. Tap Location Turn on location 
        4. Tap Settings Apps > Google Home app > Permissions.
        5. Next to "Location",  check the slider is on.
        6. Your Citation device should appear as "Set up this device" .
        \n\t
      \nIf you are still having trouble discovering your Citation devices in the Google Home app, follow the steps below for further troubleshooting.\n\n


      Troubleshooting

      \n\n

      Step 1. Reboot your Citation device 

      \n\n
      1. Disconnect the power cable from your Citation device 
      2. Reconnect power cable to your Citation device 
      \n\n

      Step 2. Force close and relaunch the Google Home app      

      \n\n
      1. From your Apple iOS device, do the following below:                   \n\t
        1. Press the Home button two times quickly. There will be a small preview of your recently used apps.      
        2. Select the app you want to close and swipe up towards the top of the screen.
        3. Launch the Google Home app again.        
        \n\t
      2. From your Android device, do the following below:              \n\t
        1. Launch the Recent Applications menu to see small previews of your recently used apps. The Recent Apps button, a square icon, should be accessible at nearly any time along the bottom of the screen along with the other buttons on the virtual task bar.
        2. Select the app you want to close and swipe left or tap the X.
        3. Launch the Google Home app again.
        \n\t
      \n \n\n

      Last thing to try​ 

      \n\n

      If you are still experiencing issues with your Citation device not connecting to your Wireless network, try the following:

      \n\n
      1. \n\t

        Try finding another mobile device to set up your Citation device, sometimes it can help connecting your speaker 

        \n\t
      2. \n\t

        Relocate your Citation device, or try to disable other Wireless network devices that might cause interference for your Citation device.

        \n\t
      3. Perform a factory reset of your device, by holding down the reset button for more than 5 seconds.
      4. Reboot your Wireless router           
      5. Lastly, try turning Wi-Fi off and then back on again on your mobile device. Reopen your Google Home app and try again.
      ","Answer__c":"

      What you need first

      \n\n

      Make sure that the device is installed on your Wireless network, by ensuring these steps below:

      \n\n
      1. You have the most recent version of the Google Home app installed 
      2. Your Citation device is powered on
      3. Your Citation device is plugged into a wall outlet.
      4. The Citation device is located near your router 
      5. The white LED lights in front of the Citation device are blinking 
      6. If you are using an Apple iOS device, you need to turn on Bluetooth to installed the device.\n\t
        1. \n\t\t

          On your iOS device Home screen, tap Settings > Bluetooth 

          \n\t\t
        2. Make sure Bluetooth is on
        3. Return back to the Google Home app 
        4. Your Citation device should appear as "Set up this device"
        \n\t
      7. If you are using an Android device, you need to turn on Bluetooth and Location Services.\n\t
        1. On your Android device, tap Settings.
        2. Find Bluetooth settings > Make sure Bluetooth is on
        3. Tap Location Turn on location 
        4. Tap Settings Apps > Google Home app > Permissions.
        5. Next to "Location",  check the slider is on.
        6. Your Citation device should appear as "Set up this device" .
        \n\t
      \nIf you are still having trouble discovering your Citation devices in the Google Home app, follow the steps below for further troubleshooting.\n\n


      Troubleshooting

      \n\n

      Step 1. Reboot your Citation device 

      \n\n
      1. Disconnect the power cable from your Citation device 
      2. Reconnect power cable to your Citation device 
      \n\n

      Step 2. Force close and relaunch the Google Home app      

      \n\n
      1. From your Apple iOS device, do the following below:                   \n\t
        1. Press the Home button two times quickly. There will be a small preview of your recently used apps.      
        2. Select the app you want to close and swipe up towards the top of the screen.
        3. Launch the Google Home app again.        
        \n\t
      2. From your Android device, do the following below:              \n\t
        1. Launch the Recent Applications menu to see small previews of your recently used apps. The Recent Apps button, a square icon, should be accessible at nearly any time along the bottom of the screen along with the other buttons on the virtual task bar.
        2. Select the app you want to close and swipe left or tap the X.
        3. Launch the Google Home app again.
        \n\t
      \n \n\n

      Last thing to try​ 

      \n\n

      If you are still experiencing issues with your Citation device not connecting to your Wireless network, try the following:

      \n\n
      1. \n\t

        Try finding another mobile device to set up your Citation device, sometimes it can help connecting your speaker 

        \n\t
      2. \n\t

        Relocate your Citation device, or try to disable other Wireless network devices that might cause interference for your Citation device.

        \n\t
      3. Perform a factory reset of your device, by holding down the reset button for more than 5 seconds.
      4. Reboot your Wireless router           
      5. Lastly, try turning Wi-Fi off and then back on again on your mobile device. Reopen your Google Home app and try again.
      ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XjAkAAK"},"Title":"HK Citation: Setup instructions iOS","Id":"ka25d000000XjAkAAK","ArticleNumber":"000025600","Question__c":"Setup instructions for Apple iOS devices","Process__c":"
      1. Power on your Harman Kardon Citation speaker.
      2. Verify that you are connected to the right Wi-Fi network on your smartphone.
      3. Open your Google Home app \"Google.
      4. Enable Bluetooth \"BT
      5. First option \"NEXTTap Add\"addd\" \"NextSet up device \"Setup \"NEXTSet up new devices in your home \"home
      6. Second  option \"NEXTTap \"Disocvery\" \"NextX device found \"Setup\"NEXTSelect Home location\"home
      7. Follow the instruction on screen to add your new Harman Kardon Citation speaker.
      \n\"setup\n\n

      Still not sure how to connect, then watch this video below:

      \n\n\n

       

      ","Answer__c":"
      1. Power on your Harman Kardon Citation speaker.
      2. Verify that you are connected to the right Wi-Fi network on your smartphone.
      3. Open your Google Home app \"Google.
      4. Enable Bluetooth \"BT
      5. First option \"NEXTTap Add\"addd\" \"NextSet up device \"Setup \"NEXTSet up new devices in your home \"home
      6. Second  option \"NEXTTap \"Disocvery\" \"NextX device found \"Setup\"NEXTSelect Home location\"home
      7. Follow the instruction on screen to add your new Harman Kardon Citation speaker.
      \n\"setup\n\n

      Still not sure how to connect, then watch this video below:

      \n\n\n

       

      ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XjQKAA0"},"Title":"HK Citation: Not visible as Chromecast device","Id":"ka25d000000XjQKAA0","ArticleNumber":"000033721","Question__c":"Sometimes my Chromecast enabled streaming app cannot see my Citation speaker. What should I do?","Process__c":""In certain network conditions, your speaker may not be visible from your streaming app. You can still use voice control to start & control playback.\n\nIf you wish to use your phone app to control playback, please power cycle your Citation speaker and your phone."","Answer__c":""In certain network conditions, your speaker may not be visible from your streaming app. You can still use voice control to start & control playback.\n\nIf you wish to use your phone app to control playback, please power cycle your Citation speaker and your phone."","ArticleType":"How_Tos__kav"}]}

      FAQs